| Finish | 2B finished |
| Grade | TA1G, TA2G, TA3G TA4G or Customizable |
| Standard | QB / GB / ASTM / JIS / EN/ |
| Thickness(mm) | 0.28 - 3.00 |
| Width(mm) | 1000 / 1219 / 1240, Customizable |
| Inner Diameter(mm) | 508, 610 |
| Coil Weight(mt) | Customizable |
| Edge State | Mill edge / Slit edge |
| Transport Package | Standard Export Packing / Customized |
| Date of Delivery | 15 - 45 days |
Key Features of TA2G Titanium Coil & TA2 Plate
TA2G titanium coil and TA2 titanium plate belong to commercially pure titanium Grade 2 materials, widely used for industrial fabrication requiring a combination of corrosion resistance, moderate strength, and excellent formability. TA2 (Grade 2) is recognized for its balanced mechanical properties, making it one of the most commonly used titanium grades in chemical, marine, energy, and medical-related industries.
Compared with lower-grade pure titanium, TA2 provides higher tensile strength while maintaining good ductility and weldability, making it suitable for complex forming and welding processes.
TA2 (Grade 2) titanium is a commercially pure titanium with higher oxygen content than Grade 1, which improves strength while maintaining ductility and corrosion resistance.
Typical mechanical properties:
Tensile strength: ≥ 345 MPa
Yield strength: ≥ 275 MPa
Elongation: ≥ 20%
Density: ~4.51 g/cm³
HWHG supplies Grade 2 Titanium Coil for industrial manufacturing and fabrication requiring a practical balance of corrosion resistance, mechanical strength, ductility and formability.
Available as TA2G Titanium Coil and other commercially pure titanium grades, our titanium coils can be supplied in thicknesses from 0.28 to 3.00 mm, with standard and customized widths, coil weights and edge conditions.
Grade 2 commercially pure titanium is widely selected for continuous forming, stamping, welding and fabrication because it provides higher strength than Grade 1 while maintaining good ductility and corrosion resistance.
| Item | Available Specification |
|---|---|
| Product | Grade 2 Titanium Coil |
| Grade | TA2G / TA1G / TA3G / TA4G / Customized |
| Material Type | Commercially Pure Titanium |
| Thickness | 0.28–3.00 mm |
| Width | 1000 / 1219 / 1240 mm or Customized |
| Coil Inner Diameter | 508 / 610 mm |
| Coil Weight | Customized |
| Edge | Mill Edge / Slit Edge |
| Surface | Finished Surface |
| Standards | GB / ASTM / JIS / EN according to order requirements |
| Packaging | Standard Export Packing / Customized |
| Typical Delivery Time | 15–45 Days |
| Applications | Forming, Stamping, Fabrication and Industrial Components |
For international orders, please specify the required grade, applicable standard, chemical composition, mechanical properties and inspection requirements when requesting a quotation.
Grade 2 is one of the most commonly used commercially pure titanium materials because it offers a useful balance between strength and fabrication performance.
Compared with Grade 1 titanium, Grade 2 generally provides higher strength while retaining good ductility, weldability and forming characteristics.
Key advantages include:
● Excellent corrosion resistance
● Good strength-to-weight ratio
● Higher strength than Grade 1 commercially pure titanium
● Good ductility and forming performance
● Good welding characteristics
● Suitable for continuous coil processing
● Low density compared with conventional steel materials
● Suitable for stamping, forming and fabricated components
This makes commercially pure titanium coil particularly useful for manufacturers that require both corrosion performance and efficient downstream processing.
The following values are general reference properties. Final mechanical and chemical requirements should always be confirmed according to the applicable material standard and mill test documentation.
| Property | Typical Reference |
|---|---|
| Material Type | Commercially Pure Titanium |
| Density | Approx. 4.51 g/cm³ |
| Tensile Strength | ≥345 MPa* |
| Yield Strength | ≥275 MPa* |
| Elongation | ≥20%* |
| Corrosion Resistance | Excellent |
| Formability | Very Good |
| Weldability | Good |
| Relative Strength | Higher than Grade 1 CP Titanium |
*Reference values only. Actual requirements depend on grade designation, product form, thickness and applicable standard.
Compared with individual titanium sheets, coil material is particularly suitable for manufacturers using continuous or repetitive production processes.
A TA2G Titanium Coil can be fed directly into downstream equipment for:
● Stamping
● Roll forming
● Cutting
● Slitting
● Welding
● Deep drawing
● Continuous component production
Using coil rather than individually cut plates or sheets can help reduce material handling and support automated production.
For customers requiring narrower material, mill edge and slit edge options can be evaluated according to the required downstream process.
HWHG lists TA2G titanium materials for applications including:
● Thermos flasks
● Kettles
● Pots
● Cutlery
● Food-contact components
The combination of lightweight performance, corrosion resistance and formability makes titanium suitable for thin-wall consumer products and formed metal components.
Grade 2 titanium is widely considered for fabricated components exposed to corrosive operating environments.
Potential applications include:
● Equipment linings
● Process components
● Tanks and vessels
● Fabricated sheet-metal parts
● Corrosion-resistant components
The exact material grade should be evaluated according to the chemical medium, concentration, temperature and operating conditions.
Titanium's corrosion resistance and good fabrication properties make Grade 2 titanium suitable for certain heat-exchanger and thermal-processing components.
Coil material can be useful where continuous forming or high-volume fabrication is required.
Grade 2 commercially pure titanium is also considered for marine and chloride-containing environments where conventional metals may suffer from accelerated corrosion.
Application conditions should be reviewed before final material selection.
For manufacturers producing repeat components, CP titanium coil provides a convenient material form for automated stamping, cutting and forming lines.
Customized coil width and weight can help match the material to specific production equipment and reduce unnecessary processing.
Grade 1 and Grade 2 are both commercially pure titanium materials, but they serve slightly different manufacturing priorities.
| Comparison | Grade 1 | Grade 2 |
|---|---|---|
| Titanium Type | Commercially Pure | Commercially Pure |
| Strength | Lower | Higher |
| Ductility | Excellent | Very Good |
| Formability | Excellent | Very Good |
| Corrosion Resistance | Excellent | Excellent |
| General Industrial Use | Good | Very Broad |
| Best Selection Focus | Maximum Formability | Strength + Formability Balance |
Choose Grade 1 when exceptional ductility and complex forming are the priority.
Choose Grade 2 titanium coil when you need a stronger commercially pure titanium material while retaining good corrosion resistance and fabrication performance.
TA2G and Grade 2 are grade designations used within different titanium material specification systems.
Because chemical composition and mechanical property requirements can vary according to the applicable standard and product form, international buyers should not rely only on the grade name.
When placing an order, specify:
● Required international or national standard
● Chemical composition requirements
● Mechanical properties
● Thickness and tolerance
● Surface condition
● Inspection requirements
● Required mill test documentation
HWHG can evaluate the requested specification before production.
Different production lines require different coil dimensions.
HWHG can evaluate customized TA2 Titanium Coil specifications according to downstream equipment and fabrication requirements.
Customization can include:
● Thickness
● Coil width
● Coil weight
● Inner diameter
● Mill edge or slit edge
● Material grade
● Applicable standard
● Packaging requirements
Standard coil inner diameter options currently include 508 mm and 610 mm, while coil weight can be customized according to project requirements.
Hongwang has been developing large-scale metal manufacturing operations since 2005 and operates multiple manufacturing bases across China.
Its manufacturing experience covers rolling, annealing, pickling, precision thickness control, surface processing, slitting and coil production.
This industrial manufacturing background provides a strong foundation for HWHG's development of titanium sheet and coil products.
Hongwang operates advanced manufacturing equipment including tandem rolling mills and 20-high rolling mills together with automated production and intelligent process-control systems.
For coil buyers, manufacturing experience in thickness control, coil handling and continuous processing is particularly valuable when consistent material dimensions are required for downstream automated production.
Hongwang Group holds 809 national patents, including 88 invention patents, 714 utility patents, one design patent and six software patents.
These patents demonstrate the Group's long-term investment in metal-processing technology, manufacturing equipment and production efficiency.
Hongwang has achieved ISO 9001:2015 certification, supporting standardized quality management throughout its manufacturing operations.
Customers with specific material testing, inspection or documentation requirements should state them before production.
Hongwang operates manufacturing bases in several regions of China and has extensive experience in large-scale coil production and export supply.
This industrial network supports:
● Stable material supply
● Customized specifications
● Large-volume orders
● Export packaging
● Production scheduling
● Long-term B2B supply cooperation
To receive an accurate quotation, provide the following information:
● Grade: Grade 2 / TA2G or other requirement
● Applicable material standard
● Thickness
● Width
● Coil inner diameter
● Required coil weight
● Edge condition
● Order quantity
● Intended application
● Inspection or certification requirements
● Destination country or port
Providing the downstream application also helps our technical and sales teams evaluate whether the selected titanium grade and coil specification are appropriate.
Grade 2 titanium coil is a continuous coil form of commercially pure titanium that combines corrosion resistance, moderate strength, good ductility and good fabrication performance.
It is commonly processed by stamping, forming, slitting, cutting and welding.
HWHG currently lists titanium coil thicknesses from 0.28 mm to 3.00 mm on this product page.
Customized specifications can be discussed according to project requirements.
Standard listed widths include 1000 mm, 1219 mm and 1240 mm, with customized widths also available.
HWHG currently lists 508 mm and 610 mm inner diameters.
The appropriate coil configuration should be selected according to the customer's decoiling and downstream processing equipment.
Yes. HWHG currently offers both mill edge and slit edge options.
Provide the required width and downstream manufacturing process when requesting a quotation.
Generally, yes. Grade 2 commercially pure titanium provides higher mechanical strength than Grade 1 while retaining good ductility, corrosion resistance and fabrication performance.
Grade 1 is normally preferred when maximum formability is more important.
HWHG currently lists GB, ASTM, JIS and EN among available standard systems.
However, buyers should specify the exact required ASTM specification, grade, chemistry and mechanical-property requirements when ordering rather than assuming that different grade designations are automatically interchangeable.
Looking for Grade 2 Titanium Coil for stamping, forming or industrial fabrication?
Send HWHG your required grade, standard, thickness, width, coil ID, coil weight, quantity and application.
Our team will evaluate your TA2G / commercially pure titanium coil requirements and provide suitable production and quotation information.
